Sonic's superior performance Typhoon Propeller Mixers and Agitators are used for mixing and agitating liquids and dissolving and suspending solids within liquids.  Our propeller mixers provide longer life and greater stability and are a big step above your average catalog propeller mixer.  The Typhoon Propeller Mixers do it better!  Our hollow shaft design and extra-wide bearing assembly provide the stability and durability needed for a long life.  Most propeller mixers have shafts that are mounted to a motor by way of an inferior coupling held by set screws, subjecting the motor and drive assembly to vibrations caused by mixing.  Our design prevents this!

• 900 - 1800 rpm Direct Drive
• 100 - 450 rpm Gear Drive
• Variable w/ VFD controller
• Variable w/ Air Drive Motors

• 1/4 to 10 horsepower
• Electric motors: 110, 220-480, 575 volts AC; 1/3 phase; 50/60 Hz
• Air drive motors
• Gear drive motors
• Stainless steel sanitary motors

• Water to 500 cps Direct Drive
• 500 - 4000 cps Gear Drive
• 5000 cps to creams
• Heavy oil viscosities

• Clamp mount to vertical surface
• 4-Bolt Base for horizontal
• Flange and bung mount
• Portable adjustable cart

In order to properly size a Typhoon Propeller Mixer, we must know the tank size, the fluid specific gravity, fluid viscosity and the type of material being mixed.  If the depth of a tank is 4 times greater than its diameter, then 2 propellers are recommended for the job.  When longer than normal shaft lengths are required, Sonic recommends a stabilizer ring welded to the OD of the propeller to prevent shaft wobble and deformation.  Please complete our Mixer Request Form and we will get back to you to discuss:

A) Motor horsepower, supply voltages, speeds
B) Drive reduction; direct, gear, etc.
C) Mounting options
D) Shaft lengths
E) Prop style; marine style, impellers, foils, etc.

home Links contact colloid mill mixers in-line blending site map

Sonic Corp  (203) 375-0063; Stratford, CT