Waukesha Pumps

Positive Displacement Universal I and Universal II Series Pumps:
univ_pump

Bi-directional flow
Large diameter shafts for greater strength & stiffness
Rotor/shaft connection sealed from the product zone
Extended-life outer seal
Mechanical seals standard
316 pump body standard; 316L pump body optional
Heavy-duty bearing frame; stainless steel bearing frame optional
Exclusive, non-galling Waukesha "88" alloy rotors for tighter running clearances and higher efficiencies
Additional options: CIP capability, free draining body and cover for side mounted applications, seal flushing, steam-in-place, aseptic version
Maximum pressure: 200-500 psi (13.8-34.5 bar), depending on model
Temperature range: -40° F. (-40° C.) to 300° F. (149° C.)*

Universal lobe pumps feature bi-directional flow with a free draining internal flat profile pump body. Uniquely designed Waukesha "88" alloy rotors permit running at tighter clearances and higher efficiencies. Fully CIP-able, the lobe pump body offers an alternative to higher priced external circumferential piston PD pumps.

Universal I Series Pumps Catalog
Universal II Series Pumps Catalog

Positive Displacement Lobe Pumps:
lobe_pump

Free draining cover in horizontal or vertical port position
Rotor/shaft connection sealed from product zone
Exclusive, non-galling Waukesha "88" alloy rotors
Mechanical seals standard; single or flushed double seals optional
Optional steam-in-place and seal flush
316 stainless steel pump body and cover; 316L pump body optional
Additional options: jacketed cover, steam-in-place and seal flush, stainless steel bearing frame, electropolish of product contact surfaces
Maximum pressure: 200-300 psi (13.8-20.7 bar), depending on model
Temperature range: -40° F. (-40° C.) to 300° F. (149° C.)

Positive Displacement Lobe Pumps Catalog

Sanitary Centrifugal Pumps:
cent_pumps The Waukesha S200 Series Centrifugal Pumps are designed for heavy-duty, high-efficiency applications. Provides exceptional corrosion resistance. Impeller and shaft are one piece, which connects directly to motor shaft; eliminating such problems as vibration, short bearing life, high NPSH requirements, high seal maintenance, poor alignment, and adverse operating conditions.

316L stainless steel volute, backplate, impeller and shaft
Five-bladed impeller with deeper eye for improved inlet characteristics
Modular seal design - one size fits all models

200 Series Centrifugal Pumps Catalog
Centrifugal Pumps C-Series Catalog